Elinge S07 refrigerated van on a FAW 1027 chassis

category Bbody 2,650 mmElinge S07 unit

⚖ payload up to 800 kg▣ inside ≈ 5.3 m³

Tall body — 1,700 mm, ≈ 5.3 m³. We also build the same FAW 1027 with a low 1,300 mm body: the plan dimensions are identical, the volume is two cubic metres less — see the low version.

The smallest reefer in our range. The FAW 1027, also known as the T80, is a Chinese light truck in licence category B: any driver with an ordinary licence can take the wheel, and it gets through where a medium-duty truck cannot turn around. A reefer like this is bought for city delivery — couriers, pharmacies, coffee shops, small wholesale: when a GAZelle is more space than you need but the cold has to be real. Fitted here is Elinge C07 roof-mounted above the cab, and a side door has been fitted on the right: working along a kerb the driver takes a box from the middle of the body without unloading everything stacked by the rear doors.

Get a quote for the same →WhatsApp

Chassis

Make / model	FAW 1027 (T80)
Engine	petrol CA4GX15, 1,495 cc, Euro 5
Power	102 hp (75 kW)
Gearbox	manual, 5-speed
Drive	rear
Wheelbase	2,960 mm
Gross weight	2,005 kg
Vehicle category	B
Payload	up to 800 kg

Chassis specifications are on a separate page.

Van

Body type	refrigerated — a body with a heating/refrigeration unit
Body dimensions	2,650 × 1,650 × 1,700 mm
Internal volume	≈ 5.3 m³ (2,450 × 1,450 × 1,500 mm)
Sandwich panel thickness	100 mm
Refrigeration unit	Elinge C07, roof-mounted above the cab
Unit position	on top, on the body roof
Temperature duty	from −20 to +12 °C
Doors	rear swing doors with rod locks plus a side door on the right
Interior lining	galvanised sheet
Kick rail	chequered aluminium along the bottom of the walls and on the inner face of the doors
Lead time	from 14 working days

More about the design on the page refrigerated vans.

Who a FAW T80 reefer suits

This is a budget refrigerated van in the literal sense: the vehicle, the body and the servicing all cost less than any medium-duty truck. The 1.5-litre petrol engine needs no pre-heater in winter, FAW parts are available in Almaty, and ordinary workshops handle repairs.

What matters about a light delivery reefer: the payload here is up to 800 kg, and the weight of the refrigerated body has already been deducted. If you carry pallets, look at a GAZelle or a Kia Bongo. If you have 20–40 stops a day with boxes and crates, the FAW 1027 does the job and saves on fuel and parking.

Refrigeration unit

This truck is fitted with Elinge C07 roof-mounted above the cab — the condenser sits over the cab, the evaporator under the body ceiling, and usable volume is not lost. The range runs from −20 to +12 °C: it suits frozen goods, chilled products and pharmaceuticals alike. On the same chassis we also fit Carrier, Elinge and Kaida — we choose by budget and temperature mode.

Body

A 100 mm sandwich panel of our own production, frameless — no cold bridges along the ribs. Inside, the body is lined with galvanised sheet, with a chequered-aluminium kick rail along the bottom of the walls and on the door leaves. The rear doors are swing doors with rod locks; on request we add a side door — on delivery rounds it saves time, so you do not have to walk around the truck and open the whole body for a single box.

Video

FAW 1027 reefers on video

Walk-arounds from our YouTube channel.

FAW 1027 (T80) walk-around — a COND refrigerated van

How to save on a reefer? The most affordable refrigerated van by COND / FAW T80

FAW 1027 refrigerated van with a Carrier Viento unit

FAQ

FAQ about the Elinge S07 reefer on a FAW 1027

A monobloc unit mounted above the cab: the condenser sits over the cab, the evaporator under the body ceiling. It goes on light chassis and runs off the vehicle engine. The name is legible on the housing — there is a frame in the gallery.

About 5.3 m³. The external dimensions are 2,650 × 1,650 × 1,700 mm with a 100 mm panel, so the inside measures 2,450 × 1,450 × 1,500 mm. You cannot simply multiply the external dimensions — the walls take 10 cm off each side.

Only in height: 1,700 mm against 1,300 mm with identical plan dimensions. The difference in volume is about two cubic metres.

Category B: the FAW 1027 has a gross weight of 2,005 kg, below the 3,500 kg threshold. Any driver with an ordinary licence can drive it.

With galvanised sheet on the walls and ceiling. A chequered-aluminium kick rail runs along the bottom of the walls and the inner face of the leaves: it takes the knocks from the crates. This is the standard build; in the premium version the body is lined with GRP.

Yes — on this chassis we fit Carrier, Elinge and Kaida. We choose by mode and budget: freezing needs a more powerful unit than chilling.

Request

Get a quote: refrigerated van on a FAW 1027

Leave your contact details — we will confirm availability/lead time and quote a price.

📞Phone
+7 777 233-69-28 💬WhatsApp
Message us

Leave a request

I consent to the processing of personal data (Law of the Republic of Kazakhstan “On Personal Data”).

Similar vehicles

Our other projects in the “refrigerated van” category. All body types are in the “Vehicles” section.