+7 777 233-69-28
EN | KZ | RU
Van bodies
Vehicles
Equipment
Components
Services
Repair and service
GAZelleGAZelle BusinessGAZelle NextKIAKia Bongo K2500Kia Bongo K4000FAWFAW T80FAW TigerFAW Tiger 6G 9 tFAW Tiger 6G 12 tShinerayShineray X30LShineray T30Shineray T32Shineray T50Shineray T52FotonFoton Aumark S35Foton Aumark S80Foton Aumark S100All chassis — 21Trucks in stockBlogFAQGet a quote
Home / Chassis makes / Kia / Kia Bongo K4000
Dry-freight body COND on a Kia Bongo K4000
Light truck · 3.5 t

Kia Bongo K4000 — chassis specifications and van price

LPG/petrol KIA THETA 2.4, 159 hp. Gross weight 3,500 kg, actual chassis payload 2,000 kg.

The Kia Bongo K4000 is the longer-wheelbase version of the Bongo III range, in demand in Almaty for urban logistics. In our specification it is Bi-Fuel: a KIA THETA 2.4 LPG/petrol engine producing 159 hp, with tanks for 71 l of LPG and 65 l of petrol — cheaper to run on urban routes, with enough torque in reserve to drive the refrigeration unit's compressor.

The quote is based on the body, the chassis and the temperature duty.

Какой body встаёт на Kia K4000

Standard размер надстройки, который чаще всего заказывают на это шасси. Другие габариты — to your spec, считаем по вашим размерам.

BodyDimensions, mmVolume
Standard4200×1900×1900≈ 11.4 m³

Volume указан по внутренним размерам с панелью 80 mm. Сколько войдёт паллет — в расчёте вместимости. Типы надстроек: isothermal, reefer, dry freight.

Kia Bongo K4000 chassis specifications

Factory chassis parameters.

Make / modelKIA Bongo K4000 (Bi-Fuel)
EngineKIA THETA 2.4, LPG/petrol, Euro 5
Displacement2,359 cc
Power159 hp at 5,500 rpm
Torque23 kgf·m at 4,250 rpm
Gearboxmanual, 5-speed
Gross weight3,500 kg
Chassis kerb weight1,895 kg
Chassis payload (actual)2,000 kg
Permissible axle loads1,550 kg front / 2,100 kg rear
Wheelbase3,350 mm
Chassis dimensions6,325 × 1,750 × 2,085 mm
Ground clearance200 mm
Top speed115 km/h
Fuel tank71 L (LPG) + 65 L (petrol)
Brakeshydraulic, ABS; front discs, rear drums
SafetyESC, ABS, driver airbag
Tyres6.50R16 LT, single front / dual rear
Vehicle categoryB
Chassis warranty2 years or 150,000 km
Standard bodyinsulated 4200×1900×1900 mm
Chassis payload2,000 kg

Body volume and pallet count for this chassis are worked out by the body calculator — allowing for the sandwich-panel thickness.

Which bodies we fit on the Kia Bongo K4000

We build and fit the body ourselves, preserving the factory chassis warranty.

A refrigerated van is an isothermal body plus a refrigeration unit: Carrier, Elinge or Kaida — selected to match the body volume and temperature range. We quote for your specific configuration.

If you need a shorter body, see Kia Bongo K2500 (wheelbase 2,615 mm). All bodies for Kia — on the brand page.

A van body on the Kia Bongo K4000

COND bodies already built on this chassis. The same one is made to order.

A van on the Kia Bongo K4000 — WhatsAppall projects on this chassis ↓

FAQ

What licence does a Kia Bongo need?
Category B. A Kia Bongo stays within 3,500 kg gross, so an ordinary car licence is enough — no separate category C. We size the body so the gross weight stays within that limit after fitting.
What engine does the Kia Bongo K4000 have?
In our specification it is the LPG/petrol KIA THETA 2.4 of 2,359 cc, 159 hp at 5,500 rpm, 23 kgf·m of torque, Euro 5. Tanks: 71 L of LPG and 65 L of petrol, 5-speed manual gearbox.
How much payload remains after the body is installed?
Per the documents the gross weight is 3,500 kg and the actual chassis payload is 2,000 kg. The body's own weight is deducted from that, depending on its type and length. Permissible axle loads are 1,550 kg front and 2,100 kg rear.
Which body fits the K4000?
The standard body is an insulated van of 4200×1900×1900 mm with about 3990×1735×1700 mm of usable space inside — enough for standard euro pallets.
How does the K4000 differ from the K2500?
Both models share the same engine — the 159 hp KIA THETA 2.4 — and both are registered at 3,500 kg gross. The difference is the wheelbase and body length: the K2500 has a 2,615 mm wheelbase and a body up to 3,000 mm, the K4000 3,350 mm and up to 4.2 m. The actual payload of the K4000 chassis is 2,000 kg.
How much does a van body for the Kia Bongo K4000 cost?
The cost is made up of the body and, for a refrigerated van, the refrigeration unit. We quote for your specific configuration: body length, temperature range and lining material. The chassis is purchased separately from a Kia dealer. Submit an enquiry — a manager will work out the figures and send you a quotation.
Is the chassis warranty retained?
Yes. We fit the body to the manufacturer's procedure and issue the paperwork required to register the design change.

Kia Bongo K4000 with COND bodies — photo gallery

Refrigerated vans on the Kia Bongo K4000 chassis — COND own production in Almaty.

COND refrigerated van on the Kia Bongo K4000 chassis with a roof-mounted refrigeration unit, front three-quarterCOND refrigerated van on the Kia Bongo K4000 chassis, side view — dual-wheel rear axleCOND refrigerated van on the Kia Bongo K4000, rear view of the hinged doors with sealingCOND refrigerated van on the Kia Bongo K4000, rear and side of the body, three-quarter

Click a photo to open it at full size.

Completed

What we have already built on this chassis

How much a made-to-order vehicle costs

A Kia Bongo K4000 chassis and a body of our own manufacture as a single item, with installation and paperwork.

SpecificationTurnkey price
COND insulated van body17,500,000 ₸*
Refrigerated body with a Kaida V-360 unit18,880,000 ₸*
Refrigerated body with a Carrier CITIMAX 350 unit20,400,000 ₸*

The difference between the rows is the price of the refrigeration unit itself — the body and the work are the same. So choose by the temperature mode your cargo needs, not by the price of the vehicle.

* Prices are in tenge, include the body and installation, are for reference only and do not constitute a public offer under clause 5 of article 395 of the Civil Code of the Republic of Kazakhstan. A manager calculates the exact cost for your configuration.

Request

Body quote for a Kia

Leave your contacts — we will select and quote. Reply within a day.

📞Phone
+7 777 233-69-28
💬WhatsApp
Message us

Leave a request

Service

COND service for this vehicle

Maintenance and repair — at the COND workshop, Almaty.

Unit maintenance under contract · Refrigerant charging and diagnostics · Seal replacement · Body repair: floor, walls, doors, roof

Where next
COND refrigerated van on the Kia Bongo K4000 chassis — enlarged photo from the gallery