Chassis make
Bodies for GAZ trucks
GAZelle Next and GAZon Next. Official body installation with the chassis manufacturer's warranty preserved.
Quote is based on body, chassis and temperature range.
GAZelle Next and GAZon Next are the most common chassis for urban logistics in Kazakhstan: a wide service network, affordable parts and a low loading height make them convenient for daily distribution. We fit almost the whole model range on GAZ — from a dry-freight van to a refrigerator and a bread van.
The GAZelle is a light truck, colloquially a “mini-truck” or “one-and-a-half-tonner”: up to 1.5 tonnes of load with dimensions handy for daily city delivery.
Both chassis fall into category B and take a body of 3.2 or 4.2 metres. Here is where the difference is and where there is none.
| Parameter | GAZelle Business | GAZelle Next |
|---|---|---|
| Engine | UMZ A275 (Evotech 2.7), 106.8 hp | Evotech 2,7 (A275), 106.8 hp |
| Torque | 220 N·m | 220 N·m |
| Gearbox | manual, 5-speed | manual, 5-speed |
| Gross weight | 3,500 kg | 3,500 kg |
| Payload | 1,500 kg | 1,500 kg |
| Licence category | B | B |
| Wheelbase | 2,900 mm (3302) / 3,500 mm (330202) | mounting length 3,200 mm (A21R23) / 4,200 mm (A21R33) |
| COND body length | 3.2 m on the 2,900 wheelbase / 4.2 m on the 3,500 | 3.2 m / 4.2 m |
| Brakes | — | disc, dual-circuit, ABS |
| Chassis warranty | — | 3 years or 200,000 km |
The engine, gross weight, payload and licence category are the same on both, so this does not affect the choice of body: a 3.2 or 4.2 metre body fits either, and the usable volume comes out the same. The difference is in the chassis itself: the Next is listed with disc brakes and ABS and a 3-year or 200,000 km warranty, while for the Business these figures are not given in the specifications, and the wheelbases are stated explicitly — 2,900 mm on the 3302 and 3,500 mm on the 330202.
A practical rule: the body length sets the wheelbase, not the other way round. A 4.2-metre body does not fit a short wheelbase, so a 330202 or a Next with a 4,200 mm mounting length is used for it. A dash in the table means the value is not stated in the chassis specifications, not that it does not exist.
Chassis specifications:GAZelle BusinessGAZelle NextHow many pallets fit in a GAZelle
Bodies COND has already built on GAZ chassis. Each page has photographs of the finished vehicle plus chassis and body specifications.
Certified conversion, not a 'garage' build.
Installation to the manufacturer’s procedure.
Our own design office — we engineer the body for your job.
The design of a body does not depend on the make — we count by the wheelbase and the axle loads.
Leave your contacts — we will select and quote. Reply within a day.
📞Phone