+7 777 233-69-28
EN | KZ | RU
Van bodies
Vehicles
Equipment
Components
Services
Repair and service
GAZelleGAZelle BusinessGAZelle NextKIAKia Bongo K2500Kia Bongo K4000FAWFAW T80FAW TigerFAW Tiger 6G 9 tFAW Tiger 6G 12 tShinerayShineray X30LShineray T30Shineray T32Shineray T50Shineray T52FotonFoton Aumark S35Foton Aumark S80Foton Aumark S100All chassis — 21Trucks in stockBlogFAQGet a quote
Home / Chassis makes / JAC / JAC M3
COND refrigerated body on a JAC M3 chassis
Panel van (compact)

JAC M3 — chassis specifications and COND bodies

Compact panel van, ~7.5 m³ load volume. Petrol/diesel, Euro 5.

The JAC M3 is a compact all-metal panel van for the city. A usable volume of around 7.5 m³, a sliding side door and economical petrol (1.997 l) or diesel (2.746 l) engines. The exact specification and power output depend on the version — we confirm them against the dealer's current quotation.

Quote is based on body, chassis and temperature range.

JAC M3 chassis specifications

Factory chassis specifications. May vary by batch and trim.

Body typepanel van
EngineHFC4GA3 petrol 1,997 cc or HFC4DE1 diesel 2,746 cc, Euro 5
Gearboxmanual
Cargo compartment volume≈ 7,5 m³
Overall dimensions≈ 5,050 × 2,080 × 2,370 mm
Internal dimensions≈ 2,450 × 1,850 × 1,600 mm
Gross weight3,490 kg
Vehicle categoryB
Chassis warranty3 years or 200,000 km

← JAC refrigerated van · The full JAC model range · Van configurator

What COND does with a JAC M3

A JAC M3 comes with a factory panel-van body, so no superstructure is fitted — the work is done on what is already there.

We insulate the load space of a panel van with sandwich panel or sprayed foam, line the walls and floor, and fit lashing tracks and seals. If the factory body is not big enough, look at the N-series chassis for a full superstructure: JAC N35, JAC N56. Locks, hinges, seals and bumpers are in the section components.

FAQ

How does the M3 differ from the M4?
The M3 is more compact than the M4. Both are panel vans; the choice depends on the volume and gross weight you need. Check exact figures with a manager.
Is the M3 suitable for a refrigerated body?
For cold-chain work the M4 or an N-series chassis with a COND body is the usual choice; the M3 can be insulated for short urban runs.
What licence is needed for a JAC M3?
Category B: the JAC M3 gross weight is 3,490 kg, which does not exceed 3,500 kg.
Which engine does the JAC M3 have?
A choice of the petrol HFC4GA3 of 1,997 cm³ or the diesel HFC4DE1 of 2,746 cm³, both Euro 5, with a manual gearbox.
How much does a body on a JAC M3 cost?
Ask the official dealers about the chassis price. The M3 arrives with a factory panel-van body of about 7.5 m³, so it is usually not about building a body but about fitting it out — the manager calculates this on request.
Is the chassis warranty retained?
Yes. The factory warranty is three years or 200,000 km. Work on the body and equipment does not void it; the change of construction is registered with documents.
Request

Body calculation for JAC

Leave your contacts — we will select and quote. Reply within a day.

📞Phone
+7 777 233-69-28
💬WhatsApp
Message us

Leave a request

Service

COND service for this vehicle

Maintenance and repair — at the COND workshop, Almaty.

Unit maintenance under contract · Refrigerant charging and diagnostics · Seal replacement · Body repair: floor, walls, doors, roof

Where next