A Foton Aumark with a drinks-carrier body — a COND review
special
Bottle carrier — a honeycomb body for bottles and crates, Almaty
A sectional body for transporting bottled liquids
The cost is calculated from the configuration: chassis, body dimensions, number of compartments and specification.
Quote is based on body, chassis and temperature range.
Video
On video
A hands-on review of the bottle carrier from our YouTube channel.
Specifications
- ✓ Guide rails inside every door — for different bottle sizes and shapes
- ✓ A sectional layout with side doors along the whole right side
- ✓ Each section opens separately — no re-handling the whole batch at a stop
- ✓ Wall thickness of 25 or 100 mm — for warm or cold climates
| Size | depends on the chassis |
| Body wall thickness | 25 or 100 mm |
| Construction material | polystyrene |
| Body outer skin | clad metal |
| Body edging | anodised aluminium profile |
| Doors | layout with side doors |
| Door seals | rubber |
| Hardware | galvanised steel cam locks |
| Marker lights | white front and red rear |
| Body lighting | interior light |
| Fenders | one-piece moulded plastic covers |
| Interior lining material | galvanised steel |
| Floor material | anti-slip moisture-resistant plywood |
Typical cargo
- ✓ Boxes and crates
- ✓ Bottled liquids in containers of various sizes
Projects
Completed beverage bodies
Side-loading bodies on various chassis — real projects from the COND plant.
⚪ CompletedFoton Aumark
Bottle carrier↔ body 5,300 mm▣ inside ≈ 27.7 m³⚖ payload up to 5,000 kg⇄ loading from both sides▣ rear wall solid
Design
Element by element — why COND
Every component a class above the standard build. Click a tab.
🔧
Body 25 or 100 mm
✓ A frameless isothermal body of 25 or 100 mm sandwich panels — the thin option for warm climates, the thick one for cold, to keep beverages from freezing.
✕ A single-skin wall without insulation does not protect water from freezing in the cold season.
About bottle carriers
What it is for
A bottle carrier is a sectional body for delivering water in 19-litre bottles. An ordinary van is awkward for this job: bottles roll, break and take a long time to unload at each address.
Design
The body is divided into bottle cells and each section opens separately — the driver picks the right quantity at a stop in seconds. The frame is reinforced for the concentrated load
Who it suits
For office and home water delivery services and distributors of bottled beverages.
How to order
Tell us your daily delivery volume — we will size the cells and van height for your chassis. The typical build is based on the Hyundai HD78.
FAQ
FAQ
Guide rails inside every door are sized for a specific bottle volume and shape — the containers do not roll or break en route, and the sectional layout lets you open only the compartment you need.
25 mm for warm climates with no risk of freezing, or 100 mm with isothermal properties — if the beverages need protection from sub-zero temperatures en route.
The typical build is based on the Hyundai HD78; we also build for other customer chassis.
Yes, the sectional body also suits boxes, crates and bottled products of various sizes — the rails are adjusted to the specific containers.
Yes, we build the body for customer chassis and mount the finished superstructure on your vehicle.
Related sections
Request
+7 777 233-69-28💬WhatsApp
Message us
Get an exact price
Leave your contacts — we will discuss your job and select the right option.
📞Phone+7 777 233-69-28💬WhatsApp
Message us
Leave a request
Where next