+7 777 233-69-28
EN | KZ | RU
Van bodies
Vehicles
Equipment
Components
Services
Repair and service
GAZelleGAZelle BusinessGAZelle NextKIAKia Bongo K2500Kia Bongo K4000FAWFAW T80FAW TigerFAW Tiger 6G 9 tFAW Tiger 6G 12 tShinerayShineray X30LShineray T30Shineray T32Shineray T50Shineray T52FotonFoton Aumark S35Foton Aumark S80Foton Aumark S100All chassis — 21Trucks in stockBlogFAQGet a quote
Home / Vehicles / KIA Bongo K4000 — insulated van
KIA K4000 insulated van — whole vehicle, front left view — COND
KIA K4000 insulated van — whole vehicle, front left view — COND
KIA K4000 insulated body — left side, 4,200 × 2,000 × 2,000 mm body — COND
KIA K4000 thermal box — rear left view, rear doors — COND
KIA K4000 isothermal van — rear swing doors closed — COND
Kia insulated truck — rear doors open, rear right view — COND
KIA K4000 thermal body — cargo area: galvanised lining — COND
Buy a Kia K4000 — batch of KIA K4000 insulated vans at the COND yard — COND
KIA K4000 van — front left view, 4,200 mm body — COND
⚪ Completed

Insulated van on a KIA Bongo K4000 chassis

4,200 mm body100 mm panelsStandard
↔ body 4,200 × 2,000 × 2,000 mm▣ inside ≈ 13.0 m³

Insulated van on a KIA Bongo K4000 chassis. Body 4,200 × 2,000 × 2,000 mm made of 100 mm sandwich panels, internal volume ≈ 13.0 m³. Specification: Standard, interior lining in galvanised sheet. Doors: two rear swing doors. No refrigeration unit: the body slows heat exchange with the outside. The body was built and mounted at the COND plant in Almaty, November 2026.

Chassis

Make / modelKIA Bongo K4000
EngineKIA THETA 2.4 (159 hp), petrol/LPG
Gross vehicle weight3,500 kg
Chassis payload2,000 kg
Wheelbase3,350 mm
Vehicle categoryB

Other COND bodies on this make — on the Kia page.

Body

Body typeinsulated van
Body dimensions4,200 × 2,000 × 2,000 mm
Internal dimensions4,000 × 1,800 × 1,800 mm
Internal volume≈ 13.0 m³ (4,000 × 1,800 × 1,800 mm)
Panel thickness100 mm
Doorstwo rear swing doors
Interior lininggalvanised sheet
SpecificationStandard
ManufactureCOND plant, Almaty

More about the design on the page insulated vans.

How this body is built

The body is built on a KIA Bongo K4000 chassis with a 3,350 mm wheelbase. Engine: KIA THETA 2.4 (159 hp), petrol/LPG. Gross vehicle weight 3,500 kg — a category B licence is enough.

Body type: insulated van, external dimensions 4,200 × 2,000 × 2,000 mm. Inside it is 4,000 × 1,800 × 1,800 mm: the panel thickness is deducted on every side, including floor and roof. Usable volume ≈ 13.0 m³, calculated from internal dimensions rather than by multiplying the external ones.

Interior lining: galvanised sheet. Doors: two rear swing doors.

Why it is built this way

Walls and ceiling are lined with galvanised sheet — the factory standard for a van body: it shrugs off moisture, takes a pallet-corner knock and is replaced in sections rather than whole panels.

What the photos show

  • Whole vehicle, front left view
  • Left side, 4,200 × 2,000 × 2,000 mm body
  • Rear left view, rear doors
  • Rear swing doors closed
  • Rear doors open, rear right view
  • Cargo area: galvanised lining
  • Batch of KIA K4000 insulated vans at the COND yard
  • Front left view, 4,200 mm body

Who it suits

An isothermal body does not produce cold — it slows heat exchange with the outside. Such a van is chosen for short runs and for cargo loaded already chilled: bread, confectionery, drinks, groceries. Usable volume here is ≈ 13.0 m³ (4,000 × 1,800 × 1,800 mm) — the block below estimates the load in pallets.

We will build the same — to your size and your chassis

This body is not a catalogue item but a project we actually built. We will make the same one to your dimensions: length, width and height are calculated for your cargo and the chassis payload, rather than fitting the cargo to a ready-made size.

We also fit it to your own chassis: bring the vehicle, we take the frame dimensions, build the body, mount it and hand it over with the conversion paperwork.

How many pallets fit

A standard 1,200 × 800 mm europallet, single tier, no restacking. Internal dimensions with a 50 mm laying allowance — a pallet will not go in dead tight.

6europallets 1,200 × 800 mm

Inside 4 000 × 1 800 × 1 800 mm · 13,0 m³

The layout scheme is on the right: it shows how the rows sit and how much room is left.

Made to order

The same one, made to order

The body is built on the customer’s chassis or supplied turnkey with the chassis.

Production timefrom 14 working days
Warranty2 years on the body
Priceper configuration
Request a quote →
FAQ

FAQ — insulated van on a KIA Bongo K4000

Internal dimensions 4,000 × 1,800 × 1,800 mm, volume ≈ 13.0 m³. Calculated from internal dimensions: a 100 mm panel on each side, including floor and roof.
An insulated body does not produce cold — it slows heat exchange with the outside. A refrigerated van is the same body with a refrigeration unit. In this KIA K4000 batch COND also built refrigerated vans with Carrier Citimax 350.
Yes. The 100 mm panel is designed for a refrigeration unit; for 13.0 m³ a Carrier Citimax 350, for example, is suitable.
The KIA Bongo K4000 has a gross vehicle weight of 3,500 kg — vehicle category B.
Yes. The body is built to the frame length and payload of the chosen chassis, and sized to the load. Quote on request.
Request

Get a quote: insulated van on a KIA Bongo K4000

Leave your contact details — we will confirm availability/lead time and quote a price.

📞Phone
+7 777 233-69-28
💬WhatsApp
Message us

Leave a request

Similar vehicles

Our other projects in the “insulated van” category. All body types are in the “Vehicles” section.

Isothermal body on a Foton 5163 (7.5 m, premium) — COND⚪ Completed

Foton 5163

An insulated van
▣ volume 40,6 m³❄ panel 100 mm▤ 15 europallets
Isothermal body on a GAZelle Next A21R32 (4.2 m, diesel) — COND⚪ Completed

GAZelle Next A21R32

An insulated van
▣ volume 17.6 m³❄ panel 100 mm▤ 6 europallets
Insulated van on a GAZon NEXT with a side door — COND⚪ Completed

GAZon NEXT

An insulated van
↔ body 5,200 × 2,500 × 2,500 mm▣ panel 100 mm
Insulated van on a Hino 500 (GD 1226) — COND⚪ Completed

Hino 500 (GD 1226)

An insulated van
↔ body 6,200 × 2,500 × 2,500 mm⚖ chassis payload 8 tonnes
Isothermal box body on a Hino 500 (GD) chassis — COND⚪ Completed

Hino 500 (GD)

An insulated van
↔ body 6,800 mm🚪 four cam-bar locks
A 43 m³ insulated van on a HOWO T5G — COND⚪ Completed

HOWO T5G

An insulated van
↔ body 7,500 × 2,600 × 2,700 mm⚖ payload 15 t
An insulated van на шасси Хендай HD35L (Hyundai H35) — COND⚪ Completed

Hyundai HD35L

An insulated van
🧊 sandwich panel🔩 lashing rings
Insulated van on an Iveco Daily 50C15 chassis — COND⚪ Completed

Iveco Daily 50C15

An insulated van
↔ body 5,200 × 2,200 × 2,200 mm▣ inside ≈ 20 m³
Insulated van on an Iveco Daily 70C15 chassis — COND⚪ Completed

Iveco Daily 70C15

An insulated van
↔ body 6,200 × 2,400 × 2,400 mm⬆ tail lift Dhollandia 1,000 kg
Insulated van on a JAC N200 chassis — COND⚪ Completed

JAC N200

An insulated van
⚖ payload up to 13.5 t↔ body 6.2 / 8.2 / 9.5 m
Isothermal box body on a JAC N35 chassis — COND⚪ Completed

JAC N35

An insulated van
⚖ chassis payload 1,900 kg🚪 side plus rear doors
Insulated van on a JAC N56 chassis — COND⚪ Completed

JAC N56

An insulated van
⚖ payload 3,445 kg↔ body 4,200 mm
Insulated van on a JAC N90 chassis — COND⚪ Completed

JAC N90

An insulated van
⚖ payload 4,300 kg↔ body up to 6 m
Isothermal body on a KAMAZ 65117 (8.2 m) — COND⚪ Completed

KAMAZ 65117

An insulated van
▣ volume 43.2 m³❄ panel 100 mm▤ 15 europallets
Isothermal box body on a KIA Bongo K2500 chassis — COND⚪ Completed

KIA Bongo K2500

An insulated van
⚖ payload 1,500 kg▣ volume 12 m³
Insulated van body on a UAZ Profi chassis — COND⚪ Completed

UAZ Profi

An insulated van
↔ body 3,200 × 2,000 × 2,000 mm▣ panel 100 mm
Service

COND service for this vehicle

Maintenance and repair — at the COND workshop, Almaty.

Unit maintenance under contract · Refrigerant charging and diagnostics · Seal replacement · Body repair: floor, walls, doors, roof

Where next