+7 777 233-69-28
EN | KZ | RU
Van bodies
Van bodiesRefrigerated vans — catalogue, 46 vehiclesInsulated vans — catalogue, 22 vehiclesRefrigerated body on your chassisInsulated body on your chassisDry freight box bodiesIce cream vansBakery vansFlatbed platformsDrop-side with tiltCurtainsiderCapacity configuratorChassis comparison
Vehicles
In stockMade to orderCompleted projectsChassisJACJAC M4JAC M3JAC N35JAC SunrayJAC N56JAC N200JAC N90JAC N120JAC N350
Equipment
EquipmentRefrigeration unitsElingeCarrierKaidaTail liftsDhollandiaCadroSliding tarpaulinsFAW T80KIA BongoHyundai Porter
Components
HardwareDoor seals for van bodiesLocks, latches and hinges for van bodiesCargo securing in a van bodySide underrun protectionMudguards and mud flaps for van bodiesLadders and steps for van bodiesLighting and marker lamps for van bodiesMounting the body to the chassisBody componentsCompressors
Services
ServicesRefrigeration equipment installationVehicle conversionsPanel van conversionVan insulationEutectic plates manufacturingMobile workshop (PARM)
Repair and service
All repair workCarrier and Elinge unit repairRefrigerant chargingMaintenance under contractSeal replacementCarrier error codesElinge error codesRefrigeration equipment installation
GAZelleGAZelle BusinessGAZelle NextKIAKia Bongo K2500Kia Bongo K4000FAWFAW T80FAW TigerFAW Tiger 6G 9 tFAW Tiger 6G 12 tShinerayShineray X30LShineray T30Shineray T32Shineray T50Shineray T52FotonFoton Aumark S35Foton Aumark S80Foton Aumark S100All chassis — 21Trucks in stockBlogFAQGet a quote
Home / Components / Hardware

Hardware for van bodies

Hardware for vans in Almaty is sold by a body manufacturer, COND (1 Kazybayev Street): hinges, “Delta” and “Push” locking devices, seals and cargo tie-down rings are supplied separately from the body, including for bodies of other makes. In-house hardware and spares for truck bodies: locks and catches, hinges, seals, lashing rings, side protection, mudguards, ladders and lighting. Every item comes with a dimensioned drawing, its material and a part number.

  • 53 items in the catalogue
  • 8 sections
  • a dimensioned drawing for every item
  • sold separately from the body

Catalogue sections

Selection

What goes on which body

The panel thickness sets the door opening, and the opening sets the seal and the lock. Hardware for a dry van and for a reefer is therefore not interchangeable.

Dry-freight van

Galvanised hardware, latch for d22 tube

Isothermal van, reefer

Stainless hardware, latch for d27 tube

The material is chosen by environment rather than by price: galvanised steel goes on dry vans, stainless on reefers and on vehicles washed every shift, because there the hardware works in damp and with road salt.

Catalogue

All items — 53

Part number, material and a drawing with actual dimensions are on each item page. Availability is confirmed by part number.

Nothing found for . Try the full part number (for example Rub60) or write to us — we will match it by size.

Door seals for van bodies

Full section, with descriptions · 9 items

Dry-freight sealing rubber, 25 mm — чертёж с размерами, фурнитура COND АлматыDry-freight sealing rubber, 25 mmrubberart. Rub25price on requestDry-freight sealing rubber, 30 mm — чертёж с размерами, фурнитура COND АлматыDry-freight sealing rubber, 30 mmrubberart. Rub30price on requestInsulated-body sealing rubber, 60 mm — чертёж с размерами, фурнитура COND АлматыInsulated-body sealing rubber, 60 mmU-profile + rubberart. Rub60price on requestRubber-plastic seal, 40 mm — чертёж с размерами, фурнитура COND АлматыRubber-plastic seal, 40 mmU-profile + rubberart. Rub02price on requestRubber-plastic seal, 50 mm — чертёж с размерами, фурнитура COND АлматыRubber-plastic seal, 50 mmU-profile + rubberart. Rub03price on requestMounting plate for rubber, 15 mm — чертёж с размерами, фурнитура COND АлматыMounting plate for rubber, 15 mmgalvanised metalart. Zn15price on requestMounting plate for rubber, 20 mm — чертёж с размерами, фурнитура COND АлматыMounting plate for rubber, 20 mmgalvanised metalart. Zn20price on requestMounting plate for rubber, 25 mm — чертёж с размерами, фурнитура COND АлматыMounting plate for rubber, 25 mmgalvanised metalart. Zn25price on requestMounting plate for rubber, 35 mm — чертёж с размерами, фурнитура COND АлматыMounting plate for rubber, 35 mmgalvanised metalart. Zn35price on request

Locks, latches and hinges for van bodies

Full section, with descriptions · 17 items

“Delta” 22 locking gear — чертёж с размерами, фурнитура COND Алматы“Delta” 22 locking geargalvanised steelart. fit0122price on request“Delta” 27 locking gear — чертёж с размерами, фурнитура COND Алматы“Delta” 27 locking geargalvanised steelart. fit0127price on request“Push” 22 locking gear — чертёж с размерами, фурнитура COND Алматы“Push” 22 locking geargalvanised steelart. fit0222price on request“Push” 27 locking gear — чертёж с размерами, фурнитура COND Алматы“Push” 27 locking gearstainless steelart. fit0227price on request2-door set with “Delta” 22/27 handle — чертёж с размерами, фурнитура COND Алматы2-door set with “Delta” 22/27 handlegalvanised steelart. fit012227price on request2-door set with “Push” 22/27 handle — чертёж с размерами, фурнитура COND Алматы2-door set with “Push” 22/27 handlegalvanised steelart. fit022227price on requestGalv. rod d22/27, 2000 mm — чертёж с размерами, фурнитура COND АлматыGalv. rod d22/27, 2000 mmgalvanised steelart. fit7price on requestGalv. rod d22/27, 2200 mm — чертёж с размерами, фурнитура COND АлматыGalv. rod d22/27, 2200 mmgalvanised steelart. fit8price on requestPlastic grab handle — чертёж с размерами, фурнитура COND АлматыPlastic grab handleplasticart. fit9price on request“Gazelle” grab handle — чертёж с размерами, фурнитура COND Алматы“Gazelle” grab handleplasticart. fit10price on requestT-shaped door catch (set) — чертёж с размерами, фурнитура COND АлматыT-shaped door catch (set)galv. steel + plasticart. fit11price on requestSub-frame door catch FD — чертёж с размерами, фурнитура COND АлматыSub-frame door catch FDgalvanised steelart. fit12price on request252 mm hinge — чертёж с размерами, фурнитура COND Алматы252 mm hingegalvanised / stainless steelpart no. Lo012 500 ₸BuyL-shaped dock buffer — чертёж с размерами, фурнитура COND АлматыL-shaped dock bufferrubberart. Buf01price on requestRectangular dock buffer — чертёж с размерами, фурнитура COND АлматыRectangular dock bufferrubberart. Buf021 900 ₸BuyRoller dock buffer — чертёж с размерами, фурнитура COND АлматыRoller dock bufferrubber, metalart. Buf05price on request90 mm side-board hinge with plate — чертёж с размерами, фурнитура COND Алматы90 mm side-board hinge with plategalvanised metalart. board013 450 ₸Buy

Cargo securing in a van body

Full section, with descriptions · 6 items

Lashing ring (recessed, cast) — чертёж с размерами, фурнитура COND АлматыLashing ring (recessed, cast)galvanised steelart. Rin01price on requestLashing ring (single-bolt) — чертёж с размерами, фурнитура COND АлматыLashing ring (single-bolt)galvanised steelart. Rin02price on requestLashing ring (recessed, round) — чертёж с размерами, фурнитура COND АлматыLashing ring (recessed, round)galvanised steelart. Rin03price on requestLashing ring (recessed, oval) — чертёж с размерами, фурнитура COND АлматыLashing ring (recessed, oval)galvanised steelart. Rin04price on requestLashing track — чертёж с размерами, фурнитура COND АлматыLashing trackgalvanised steelart. Rin05price on requestLashing ring TKA-002 — чертёж с размерами, фурнитура COND АлматыLashing ring TKA-002galvanised steelart. Rin06price on request

Side underrun protection

Full section, with descriptions · 6 items

Side guard bracket 400 mm — чертёж с размерами, фурнитура COND АлматыSide guard bracket 400 mmaluminiumart. ck0108 800 ₸BuySide guard bracket 700 mm — чертёж с размерами, фурнитура COND АлматыSide guard bracket 700 mmaluminiumart. ck011price on requestSide guard rail — чертёж с размерами, фурнитура COND АлматыSide guard railaluminiumart. ck01235 000 ₸BuySide guard end cap, aluminium — чертёж с размерами, фурнитура COND АлматыSide guard end cap, aluminiumaluminiumart. ck013price on requestSide guard end cap, plastic — чертёж с размерами, фурнитура COND АлматыSide guard end cap, plasticplasticart. ck014price on requestSide guard assembly, 2 m (2 rails) — чертёж с размерами, фурнитура COND АлматыSide guard assembly, 2 m (2 rails)aluminiumart. ck015price on request

Mudguards and mud flaps for van bodies

Full section, with descriptions · 6 items

“Gazelle” fender — чертёж с размерами, фурнитура COND Алматы“Gazelle” fenderplasticart. К-43price on requestFender K-470 — чертёж с размерами, фурнитура COND АлматыFender K-470plasticart. К-47015 000 ₸BuyFender K-500 — чертёж с размерами, фурнитура COND АлматыFender K-500plasticart. К-50020 500 ₸BuyFender K-520 — чертёж с размерами, фурнитура COND АлматыFender K-520plasticart. К-52024 000 ₸BuyFender mounting bracket (small) — чертёж с размерами, фурнитура COND АлматыFender mounting bracket (small)plasticart. М145price on requestFender mounting bracket (large) — чертёж с размерами, фурнитура COND АлматыFender mounting bracket (large)plasticart. Б200price on request

Ladders and steps for van bodies

Full section, with descriptions · 4 items

Pull-out step, 1 tread — чертёж с размерами, фурнитура COND АлматыPull-out step, 1 treadgalvanised steelart. sta01price on requestPull-out step, 2 treads — чертёж с размерами, фурнитура COND АлматыPull-out step, 2 treadsgalvanised steelart. sta02price on requestPull-out step, 3 treads — чертёж с размерами, фурнитура COND АлматыPull-out step, 3 treadsgalvanised steelart. sta03price on requestPerforated step — чертёж с размерами, фурнитура COND АлматыPerforated stepgalvanised steelart. sta04price on request

Lighting and marker lamps for van bodies

Full section, with descriptions · 2 items

Marker lamps with bulb (white) — чертёж с размерами, фурнитура COND АлматыMarker lamps with bulb (white)plasticart. Lad111price on request

Mounting the body to the chassis

Full section, with descriptions · 3 items

G-3302 body U-bolt, 370 mm — чертёж с размерами, фурнитура COND АлматыG-3302 body U-bolt, 370 mmgalvanised steel3 000 ₸BuyG-3302 body U-bolt, 410 mm — чертёж с размерами, фурнитура COND АлматыG-3302 body U-bolt, 410 mmgalvanised steel3 000 ₸BuyU-bolt plate 120×60×8 mm — чертёж с размерами, фурнитура COND АлматыU-bolt plate 120×60×8 mmsteelart. 53-85000321 500 ₸Buy
Dimensions

Size ranges by category

Hardware is chosen by size, not by name. Below is what each category contains; the actual dimensions and the drawing are on the item page.

Locking devices
“Delta” and “Push” for d22 and d27 tubes; a two-door set with a 22/27 handle — open the section
Rod and door catches
galvanised d22/27 tube 2,000 and 2,200 mm long; an under-frame FD door retainer with a 400 mm reach — open the section
Sealing rubber
dry-freight 25 mm (28 mm lip, 20 mm reach) and 30 mm (20 mm lip); isothermal 60 mm (45 mm high, three 4 mm lips); rubber-plastic with a U-profile of 20, 40 and 50 mm; a 10 mm shelf on all of them — open the section
Mounting plates for rubber
15, 20, 25 and 35 mm, galvanised metal — open the section
Cargo lashing rings
a cast recessed ring on a 100 × 95 mm plate; a round recessed ring with a Ø102 mm flange; an oval recessed ring 100 × 145 mm; a single-bolt ring 80 × 70 mm; a TKA-002 lashing ring — Ø65 mm from Ø7 mm bar — open the section
Cargo track
a 130 mm profile, 114 mm working section, a 61 × 25 mm slot at 51 mm pitch, 12 mm from the wall, 2 mm sheet — open the section
Side guards
brackets of 400 mm (435 mm overall) and 700 mm (705 mm), aluminium; the profile, aluminium and plastic end caps; a 2 m assembly in two rows — open the section
Mudguards and brackets
“GAZelle” 420 × 560 mm, K-470,835 × 520 mm, K-500,970 × 490 mm, K-520 1,255 × 630 mm; mounting brackets of 145 and 200 mm — open the section
Ladders and steps
sliding steps with 1 step (456 / 486 mm wide), 2 steps (600 / 630 mm) and 3 steps; a perforated footplate 185 × 185 mm — open the section
Hinges
a 252 mm leaf, 241 mm reach, 140 mm high, 115 mm between centres, wings at 122 / 100 mm; galvanised and stainless steel — open the section
FAQ

FAQ about hardware

From the body manufacturer COND, Almaty, 1 Kazybayev Street. Hinges (galvanised and stainless steel), “Delta” and “Push” locking devices for d22 and d27 tube, 25 and 30 mm dry freight sealing rubber and 60 mm isothermal sealing rubber are supplied separately from the body. Selection is by size from the drawing; availability is confirmed by part number.
For the GAZelle: “Gazelle” fenders 420 × 560 mm, G-3302 U-bolts with pads for fastening the body to the frame. Locks, hinges and seals are selected by the diameter of the lock tube and the width of the rubber base — the dimensions are on the drawing of each item.
Hardware means the fittings: locks and catches, hinges, seals, lashing rings, mudguards, ladders and lamps. Body components are what the body is made of: the framing profile, the panels, the doors and the flooring.
Yes, hardware and spares are supplied separately, including for bodies built elsewhere. Selection is by part number and by the dimensions on the drawing.
By category and size. Each item has its own page with a drawing, actual dimensions, material and part number — availability is checked by that number.
Yes. Galvanised steel goes on dry vans, stainless on refrigerated bodies and vehicles that are washed often: the hardware there works in moisture and road salt.
Request

Request fittings

Leave your contacts — we will confirm availability, quote the price and lead time. Reply within the day.

📞Phone
+7 777 233-69-28💬WhatsApp
Message us

Leave a request

Items in this section are supplied separately from the body, including for bodies built by others. Selection goes by the dimension on the drawing: for a lock it is the tube diameter, for rubber the base width, for a bracket the length. The article number is needed only to confirm availability.
The isothermal 60 mm with a U-profile: 45 mm high, three lips 4 mm thick. On a dry van the opening is narrower and takes 25 or 30 mm rubber. Dry-freight rubber must not be used on an isothermal body — it does not cover the opening across the panel thickness, and the door lets heat through.
The rings are fitted in rows along the bottom of the walls, at a pitch suited to the cargo length. If the cargo changes from trip to trip, a lashing rail is fitted instead: its slot at 51 mm pitch lets the fastening be moved without drilling. The rail is mounted in one or two rows.
A compressor is a component of the refrigeration unit rather than body hardware, so it is not here but in the “Components” section: the TM13 at 131 cm³, the TM16 at 163 cm³ and the Sanden SD7H15 at 155 cm³ — for Carrier, Elinge and Thermo King units and for factory air-conditioning systems. Availability is confirmed with a manager.
Where next

Related categories

Refrigerated vansEutectic (ice cream) vansInsulated vansDry freight vansBread vans

Chassis for the body

JACГАЗельKiaFAWFotonAll chassis →

Services

Reefer unit installationVan and reefer repairInsulation and conversionHardwareFrom the blog