+7 777 233-69-28
EN | KZ | RU
Van bodies
Vehicles
Equipment
Components
Services
Repair and service
GAZelleGAZelle BusinessGAZelle NextKIAKia Bongo K2500Kia Bongo K4000FAWFAW T80FAW TigerFAW Tiger 6G 9 tFAW Tiger 6G 12 tShinerayShineray X30LShineray T30Shineray T32Shineray T50Shineray T52FotonFoton Aumark S35Foton Aumark S80Foton Aumark S100All chassis — 21Trucks in stockBlogFAQGet a quote
Home / Vehicles / JAC N120 (tilt body)
Tilt body JAC N120 buy in Almaty — COND
Tilt body JAC N120 buy in Almaty — front 3/4 on the left — COND
Tilt body JAC N120 Astana — the left side in full — COND
Tilt body JAC N120 from the manufacturer — rear 3/4 — COND
Tilt body JAC N120 Kazakhstan — the hinged rear doors — COND
Tilt body JAC N120 by COND — the body open, the frame and battens
Tilt body JAC N120 in Almaty — tilt inside: frame and wooden battens — COND
JAC N120 Tilt body — the tarpaulin tensioner — COND
Tilt body JAC N120 Astana — the cab — COND
Tilt body platform on a JAC N120 chassis — COND
⚪ Completed · built to order

Tilt body platform on a JAC N120 chassis

category Csliding tarpaulinframe with battens
⚖ payload 7,690 kg↔ deck 6,200 mm

A tilt body on the JAC N120 is the compromise that covers most supply work: the load is protected from rain and dust yet can be loaded from any side and from above. A frame with a sliding tarpaulin goes onto a 6.2 m flatbed, and the chassis payload is 7,690 kg. Slide the tilt and a forklift comes in along the whole side, with no need to work from the rear.

Chassis

Make / modelJAC N120
EngineCummins ISF3.8S5168 diesel, Common Rail + SCR, Euro 5
Engine displacement3,760 cc
Power166 hp (122 kW)
Torque592 N·m at 1,300–1,700 rpm
Gearboxmanual, 6-speed
Wheelbase4,700 mm, mounting length 6,200 mm
Gross weight11,980 kg
Brakesair, ABS
Vehicle categoryC
Chassis payload7,690 kg

Chassis specifications are on a separate page.

Body

Body typetilt body — a platform with a frame and sliding tarpaulin
Deck length6,200 mm
Sidesgalvanised, folding, under the tilt
Tiltsliding, on a frame with cross members and wooden battens
Rearhinged doors
Loadingfrom above, from both sides and from the rear
Side underrun protectionaluminium, to safety requirements
Production timefrom 14 working days

More about the design on the page tilt bodies.

Who a JAC N120 tilt body suits

A tilt body (tilt) on a JAC N120 is chosen when a van is more than you need but an open platform does not protect the load. Packaged furniture, appliances, building materials, profile and pipe, groupage — anything that fears rain but needs neither cold nor an airtight body.

A 7,690 kg payload and a 6.2 m deck — eight Euro pallets in a single row. A Cummins ISF3.8S5168 with 166 hp and 592 N·m from 1,300 rpm and air brakes with ABS: this truck is built for the highway, not just the city.

How the tilt is built

Tilt sliding, on a frame with cross members. Inside, wooden battens run along the sides: they hold the tilt’s shape and keep the load from rubbing the fabric. Tensioners along the bottom secure the sheet so it does not flap on the highway or wear through at the seams.

Loading works from three directions: slide the tilt and load along the whole side with a forklift; remove the cross members and load from above with a crane; open the rear swing doors and load from the back. A closed van cannot do that.

What else we fit

Aluminium side guards to safety requirements. On request: stanchions for pipe and profile, lashing rings and rails, a tail lift. If you do not need the tilt, we build the same body as an open flatbed platform, and the frame with the tilt can be added later.

Video

A COND tilt body on video

Walk-arounds from our YouTube channel.

Video review: assembled flatbed platform COND with tilt on a JAC
JAC N56 walk-around — a COND knock-down flatbed with a tilt. The same construction as on the N120

Similar vehicles

Our other projects in the “tilt body” category. All body types are in the “Vehicles” section.

Tilt body on a HINO 300 — COND⚪ Completed

HINO 300

Tilt body
⚖ chassis payload 5 tonnes⚙ 165 hp, 6-speed manual
Tilt body on a JAC N56 — COND⚪ Completed

JAC N56

Tilt body
⚖ payload 3,445 kg↔ deck 4,200 mm

How this body is built

The vehicle is built on a JAC N120 chassis with a 4,700 mm, mounting length 6,200 mm wheelbase. The engine is Cummins ISF3.8S5168 diesel, Common Rail + SCR, Euro 5, 166 hp (122 kW). Gross weight 11,980 kg, so the driver needs a category C licence.

What is in the photos

  • Front 3/4 on the left
  • The left side in full
  • Rear 3/4
  • The hinged rear doors
  • The body open, the frame and battens
  • Tilt inside: frame and wooden battens
  • The tarpaulin tensioner
  • The cab

We will build the same — to your size and your chassis

This body is not a catalogue item but a project we actually built. We will make the same one to your dimensions: length, width and height are calculated for your cargo and the chassis payload, rather than fitting the cargo to a ready-made size.

We also fit it to your own chassis: bring the vehicle, we take the frame dimensions, build the body, mount it and hand it over with the conversion paperwork.

If you are still choosing a chassis, we have the same body on other bases as well: DongFeng C120L, HINO 300 615, Hino 500. They differ in payload, frame length and licence category.

FAQ

FAQ about the JAC N120 tilt body

Loading. Slide the tilt and a forklift comes in along the whole side; remove the cross members and load from above with a crane; open the rear doors and load from the back. A closed van gives access only from the rear and through a side door. The load is just as protected from rain and dust.
The chassis payload is 7,690 kg and the deck is 6,200 mm: eight Euro pallets in a single row. A frame with a tilt weighs less than a closed body, so more usable load remains than with a van.
Uprights and cross members along the whole length, with a sliding tilt drawn over the top. Wooden battens run along the sides inside: they hold the shape and keep the load from rubbing the fabric. Tensioners along the bottom stop the sheet flapping on the highway and wearing at the seams.
It slides lengthways — that is the normal mode for side loading. For crane loading from above the cross members come off and the body is fully open.
Yes, the structure is knock-down. We fit the open flatbed first; the frame with the tilt is added later without rebuilding the platform itself.
We price it to the configuration: frame height, tilt material, battens, stanchions, tail lift. Leave a request or write on WhatsApp and we will send the figures. COND does not publish body prices.
Category C: the gross weight is 11,980 kg. This is a medium-duty truck with air brakes and ABS, built for the highway.
From 14 working days. Steelwork, the frame and the tilt stitching all happen in our own shop in Almaty. COND is a plant with its own manufacturer WMI code, so we issue the full set of conversion documents and the entry in the vehicle passport.
Request

Get a quote: tilt body on a JAC N120

Leave your contact details — we will confirm availability/lead time and quote a price.

📞Phone
+7 777 233-69-28
💬WhatsApp
Message us

Leave a request

Service

COND service for this vehicle

Maintenance and repair — at the COND workshop, Almaty.

Unit maintenance under contract · Refrigerant charging and diagnostics · Seal replacement · Body repair: floor, walls, doors, roof

Where next