Chassis · KAMAZ
KAMAZ 43118 — chassis and COND body specifications
A 6×6 all-wheel-drive chassis with a KAMAZ 740.705-300 engine (Euro 5, 300 hp): gross vehicle weight 21,600 kg, body plus payload mass up to 13,425 kg, frame mounting length 6,070 mm — category C.
The figures are for the 43118-23027-50 variant (chassis for a body). For other 43118 variants the wheelbase, mounting length and mass differ; for a specific order the data are taken from the chassis passport.
KAMAZ 43118 chassis specifications
Source: catalog data for the KAMAZ 43118-23027-50 chassis: kamazik.ru, kamautocentr.ru, uzst.ru, drom.ru (reference of 07.10.2026).
| Make / model | KAMAZ 43118 (6×6), variant 43118-23027-50 |
| Engine | KAMAZ 740.705-300, V8 diesel, Euro 5 |
| Displacement | 11,76 л |
| Power | 221 kW (300 hp) at 1,900 rpm |
| Torque | 1 275 Н·м |
| Gearbox | manual KAMAZ-154, 10 forward / 2 reverse (or ZF 9S1310) |
| Wheel arrangement | 6×6, all-wheel drive, single tyres, inter-axle and inter-wheel differential locks |
| Transfer case | 65111 |
| Wheelbase | 3 690 + 1 320 mm |
| Mounting length | 6 070 mm |
| Rear frame overhang | 1 870 mm |
| Chassis kerb weight | 9 075 kg |
| Gross weight | 21 600 kg |
| Chassis payload | 13 425 kg |
| Axle loads | front axle 5,800 kg, rear bogie 15,800 kg |
| Tyres | 425/85 R21 (or 390/95 R20), tyre inflation system |
| Fuel tanks | 210 + 350 L, AdBlue tank |
| Ground clearance | 385 mm |
| Electrical equipment | 24 V, 2 batteries, pre-start heater |
| Cab | single, high roof, no sleeper |
| Vehicle category | C |
Which bodies we fit on the KAMAZ 43118
- Reefer on a KAMAZ — thermal body 6.2 m, 100 mm sandwich panel, Elinge C5 Max
- Crew buses and living modules — module on a steel frame
- All bodies on KAMAZ — COND projects on KAMAZ chassis
What COND has built on the KAMAZ 43118
- Refrigerated van on a KAMAZ 43118 — reefer, 6,200 × 2,500 × 2,500 mm
FAQ
What is the payload of the KAMAZ 43118?
Per the catalog for the 43118-23027-50 chassis, the body plus payload mass is 13,425 kg at a gross vehicle weight of 21,600 kg; the chassis kerb weight is 9,075 kg. Axle loads: front axle 5,800 kg, rear bogie 15,800 kg.
What licence is required for the KAMAZ 43118?
Category C.
What body fits the KAMAZ 43118?
The frame mounting length of the 43118-23027-50 variant is 6,070 mm; for other variants it is 6,005–7,035 mm. A COND project: 6.2 m reefer on the 43118.
Is all-wheel drive retained with the body?
Yes: the body is mounted on a subframe, and the chassis transmission and locks are not changed.
Request
+7 777 233-69-28💬WhatsApp
Message us
Quote for a body on the KAMAZ 43118
Leave your contacts — we will select and quote. Reply within a day.
📞Phone+7 777 233-69-28💬WhatsApp
Message us
Leave a request
Service
COND service for this vehicle
Maintenance and repair — at the COND workshop, Almaty.
Unit maintenance under contract · Refrigerant charging and diagnostics · Seal replacement · Body repair: floor, walls, doors, roof
Where next